DIY computer desk with built-in system unit
As you know, the organization of the workplace affects productivity. The person who made this table, by virtue of the type of activity, spends a lot of time at the computer, and this is his workplace, in addition to a photo / video camera.
Tools and materials
– Walnut board;
– Ash board;
– Walnut veneer;
– Chipboard edge;
– Guides for furniture boxes;
-The strip is metal;
-Black spray paint;
-A circular saw;
The step-by-step DIY guide to make your own computer wood desk
Step one: the worktop The worktop
will be made of walnut board with ash wood insert. The total length of the table top is 180 cm. The length of the sides is 60 cm. Cuts the boards for the table top.
Bonds the side parts of the countertop.
Glues the top. After gluing, grinds the worktop parts.
Step two: bedside tables
Bedside tables will be made of MDF. The master cuts the sheet to size. The left and right side tables are identical.
Collects bedside tables.
Step three: boxes
Next, cuts blanks for boxes. Collect boxes.
Adheres the edge to the boxes.
Bonds the front panel for the drawers. After gluing, trims to size.
Step four: assembly
The ends of the worktop parts are cut off at an angle of 45 degrees. Makes cutouts for dowels.
Applies glue and assembles the countertop.
Fastens the bedside tables.
A groove is cut in the upper back side of the tabletop. Wires will be routed through this slot.
For the same purpose, assembles and screws the “reverse” shelf from the bottom of the table top.
The milling cutter rounds the edges of the table top.
Bolts the front to the drawers.
Step Five: Finish
Coats the worktop with four layers of varnish. Sands the surface between layers.
Step six: installation of the computer Install the computer
into one of the boxes with vertical placement.
Step Seven: Ventilation
In the back wall, in the place where the system unit is located, makes a cutout. It is needed for ventilation.
In the panel that closes the drawer with the system unit in front, it makes several cuts.
Legs The craftsman decided to make the legs for the table from metal.
Cuts off strip and shaped tube.
Welds the legs. Drills mounting holes. Paints.
Step Nine: Installation
The final step is to bring the table home and complete the final assembly.
All is ready.
DIY computer desk with built-in system unit. From SL https://incredibletinyhouse.com/
More about “DIY computer desk with built-in system unit” ? Follow us on Instagram: https://www.instagram.com/incredibletinyhouses
Originally posted 2020-08-01 09:03:40.